公司新闻
产品
联系嘉瑞杰
山东嘉瑞杰机械科技有限公司
联系人：王经理
电话：0531-88670722
手机 : 15866677695
地址：济南市天桥区梓东大道鑫茂科技城143号楼102室
为什么快速成型在汽车行业的应用越来越多？
来源：http://m.metferro.com作者：山东嘉瑞杰机械科技有限公司发布时间：2022-03-03
现在交更加便利，交通工具越来越多。举个例子，随着生活水平的提高，汽车的使用率越来越高，现在越来越多的汽车和款式，快速成型在汽车工业中的应用也有所增加。
Now the transportation is more convenient and there are more and more means of transportation. For example, with the improvement of living standards, the utilization rate of automobile is higher and higher. Now there are more and more automobile brands and styles, and the application of rapid prototyping in automobile industry is also increasing.
快速成型的功能和壳体的更新不能由手模型来完成，因为一个新开发的产品一定要做一个手板模型来测试其结构和功能的正确性。在车灯下，我们一次接到客户的需要，他需要做一辆轻手车，不是一个样品，而是一个小批，所以我选择了真空在这个过程中。
The function of rapid prototyping and the renewal of shell cannot be completed by hand model, because a newly developed product must first make a hand model to test the correctness of its structure and function. Under the lamp, we received the customer's need once. He needed to make a light truck, not a sample, but a small batch, so I chose vacuum in this process.
在这个过程中，一些朋友对这个过程了解不多。今天，我们的小伙伴将详细地为您解释加工项目。
In this process, some friends don't know much about this process. Today, our little partner will explain the processing project for you in detail.
一、根据客户图纸、CNC加工或3D打印工艺原型制作喷嘴。
1、 Make the nozzle according to the customer's drawing, CNC machining or 3D printing process prototype.
小批量加工
Small batch processing
二、原型被板包围，原型固定，周围的空间需要建立，以确保硅胶能够完全覆盖和关闭产品。这一边是准备模具。
2、 The prototype is surrounded by the plate, the prototype is fixed, and the surrounding space needs to be established to ensure that the silica gel can completely cover and close the product. This side is to prepare the mold.
手板的小批量加工
Small batch processing of hand board
三、将装有样机的木箱放入真空成型机中，真空泵送入模具，所有产品都被覆盖。
3、 Put the wooden box with the prototype into the vacuum forming machine, send the vacuum pump into the mold, and all products are covered.
小批量加工
Small batch processing
四、将注塑模具放入烤箱烘烤，使硅酮模具加速凝固。
4、 Put the injection mold into the oven for baking to accelerate the solidification of the silicone mold.
小批量加工
Small batch processing
五、把原型完全拿出来。
5、 Take out the prototype completely.
六、根据快速成型产品所需的物料，真空喂料，重复上述1-5次操作，即可再次生出一些成品。
6、 According to the materials required for rapid prototyping products, vacuum feed and repeat the above operation for 1-5 times to produce some finished products again.
上一篇：手板快速成型方法有哪几种？
相关资讯
手板制作加工时注意事项
2024-04-11手板加工如何服务好客户?
2024-04-09手板加工的过程及方式
2024-04-06快速成型的基本原理构成有哪些？
2024-02-27工业产品设计中常见手板件的制作方式
2024-02-23ABS手板模型的优势有哪些？
2024-02-21铝合金手板模型制作手法与维护
2024-02-10铝合金手板模型的氧化工艺介绍
2024-02-10汽车手板模型制作的低压灌注工艺
2024-02-06手把手教你怎么选机箱机柜定制工厂
2024-01-27
