手板模型设计过程中，产品成分需要修饰，或在模塑时将信息输入，或在成型后将信息附加到手板模型上，这些都需要在各自的草图多面描述、细化、说明。下面济南手板厂家就来分析手板模型设计过程中的产品修饰内容。

In the process of prototype design, product components need to be modified, or information is input during molding, or information is attached to the prototype after molding, which needs to be described, refined and explained in their own sketches. Next, Jinan prototype manufacturer will analyze the product decoration content in the prototype design process.

如果手工板模型是彩色或它的内部是彩色，彩色系统须被确定，这些颜色是由树脂或涂料，如一种有机颜料被添加到基体树脂，染料或色粉末样品提供。涂料体系还须是在终产品中的测试，以确保涂料不会降低树脂的性能。油漆混合比，如果可能的话，它的组合物应该由卖方提供。

If the manual board model is colored or its interior is colored, the color system must be determined. These colors are provided by resin or coating, such as an organic pigment added to the matrix resin, dye or color powder sample. The coating system must also be tested in the final product to ensure that the coating will not degrade the performance of the resin. Paint mixing ratio, if possible, its composition shall be provided by the Seller.

为基体树脂的物理性质的有害影响的一些有机颜料不明显当含量低。有些人可能需要特殊的塑料，需要进行表面处理装修前，要静电。如果您需要特殊的处理和准备，你将需要在计划和生产图纸绘制。修改以增加标准模型的价值，但如果你不好好变得有缺陷，它会降低利润，客户投诉。

The harmful effects of some organic pigments on the physical properties of the matrix resin are not obvious when the content is low. Some people may need special plastics, and static electricity shall be eliminated before surface treatment and decoration. If you need special handling and preparation, you will need to draw in the planning and production drawings. Modify to increase the value of the standard model, but if you do not properly become defective, it will reduce profits, customer complaints.

手板模型设计修饰可用多种方法完成，如模具的修改，着色，贴花，金属加工，电镀，等改造工作是在工厂通常完成，但更具体的工作，例如电镀，金属加工由外部厂商完成。如果是在户外进行，将需要联络卖家，以确定表面处理修改后的操作要求。可能包括手板，以满足特殊的清洁需求，或者不需要任何。

The design and decoration of hand model can be completed in many ways, such as mold modification, coloring, decal, metal processing, electroplating, etc. The transformation work is usually completed in the factory, but more specific work, such as electroplating, metal processing is completed by external manufacturers. If it is carried out outdoors, the Seller shall be contacted to determine the modified operation requirements of surface treatment. Handboards may be included to meet special cleaning needs, or no treatment is required.

经常出现的情况是，如果在修饰过程中修饰方法能够引起手板模型破裂，就需要选择特定的条件以便降低产品的模塑应力。这种现象在塑料进行表面金属处理时会经常看到，当它们需要用酸蚀刻时，如果制品内的模塑应力过高，就会导致手板模型制作失败。

It often happens that if the modification method can cause the prototype to crack during the modification process, specific conditions need to be selected to reduce the molding stress of the product. This phenomenon is often seen when the plastic surface is metal treated. When they need to be etched with acid, if the molding stress in the product is too high, it will lead to the failure of the prototype production.

这些特定的问题需要提出来，以确保在手板模型设为需要修饰的手板模型选择特定的条件。同时，对材料和手板模型产生影响的修饰过程也需要讨论，如清洗溶液、溶剂、蚀刻剂、着色烘干时间和温度等。从标准生产堆所取的待修饰产品，在模塑后尽可能快的进行终应用检验，确保模塑过程没有导致模塑产品产生应力，这种应力会在修饰过程和终应用过程中出现问题。

These specific problems need to be raised to ensure that specific conditions are selected for the prototype to be modified during the prototype design. At the same time, the modification processes that affect the materials and the prototype also need to be discussed, such as cleaning solution, solvent, etchant, dyeing drying time and temperature. The products to be modified from the standard production stack shall be subject to final application inspection as soon as possible after molding to ensure that the molding process does not cause stress in the molded products, which may cause problems in the modification process and final application process.

分析手板模型设计过程中的产品修饰就讲解到这里了，您对此有什么疑惑或者需求，都可以随时关注我们网站http://m.metferro.com联系到我们，有关人员为您进行竭诚服务！

This is the end of the product decoration in the design process of the analysis prototype. If you have any doubts or needs, you can follow our website at any time http://m.metferro.com Contact us, and the relevant personnel will serve you wholeheartedly!