在手板模型加工過程中咱們會盡量避免有失誤的情況出現，但是在定制加工工作當中，想要不犯錯幾率很小。那么北京手板模型加工出錯之后如何補救？

We will try our best to avoid errors in the process of prototype processing, but in customized processing, the probability of not making mistakes is very low. So how can we remedy any errors in the processing of the Beijing prototype?

1、一些手板模型出現較大的失誤就不可補救了，只能報廢，像透明件PMMA，PC等，因為透明工件是不許有粘接痕跡的。

1. Some prototype models with significant errors cannot be remedied and can only be scrapped, such as transparent parts such as PMMA and PC, as transparent parts are not allowed to have adhesive marks.

2、一些工件是可以進行補救的，工件為非透明件，像ABS，POM，PA等，一般都是針對塑膠件進行補救。補救的方法一般可用補救材料填在過切或錯切的地方，常用的補救材料是502膠水混合痱子粉或原子灰。取適量痱子粉加入502膠水調成稀糊狀即可成為502膠水混合痱子粉，將調好的材料填入過切的地方待干后再補加工一下即可。

2. Some workpieces can be remedied, and they are non transparent, such as ABS, POM, PA, etc. Generally, they are remedied for plastic parts. The remedial method can generally be filled with remedial materials in the area of over cutting or miscutting, and the commonly used remedial materials are 502 glue mixed with prickly heat powder or atomic ash. Take an appropriate amount of prickly heat powder and add 502 glue to make a thin paste. Mix the mixture of 502 glue and prickly heat powder. Fill the cut area with the prepared material and let it dry before further processing.

要注意：

Please note:

對生產程序進行規劃，提高材料使用率的同時提高工作效率。我們在北京手板模型加工之前，一定要了解加工內容，根據加工的內容合理的安排安裝基面、加工基面，這樣就能實現對原材料進行一個合理的采購，提高材料的利用率，減少浪費的同時也提高了手板加工的效率。

Plan the production process to improve material utilization while improving work efficiency. Before processing the prototype in Beijing, we must understand the processing content and arrange the installation and processing of the substrate reasonably according to the processing content. This can achieve a reasonable procurement of raw materials, improve material utilization, reduce waste, and improve the efficiency of prototype processing.

注意在多次成型過程中產生的熱變形在制作復雜零件的時候，雖然要經過多次的成型的技術，但是為了獲得精美的零件的話，我們一定要注意在加工的過程中由于熱產生的變形，我們一定要在制作安裝的過程中小心零件的尺寸。

Pay attention to the thermal deformation generated during multiple forming processes. When making complex parts, although multiple forming techniques are required, in order to obtain exquisite parts, we must pay attention to the deformation caused by heat during the processing. We must be careful about the size of the parts during the manufacturing and installation process.

手板加工過程中因為材料性能很脆易裂，又不能有粘接痕跡，在加工過程中要特別注意，在加工手板模型的時候一定是需要非常的謹慎、專注的。更多相關的信息就來我們網站http://m.metferro.com進行咨詢吧！

During the processing of the hand board, due to the brittle and easily cracked material properties and the absence of adhesive marks, special attention should be paid during the processing. When processing the hand board model, it is necessary to be very cautious and focused. For more relevant information, come to our website http://m.metferro.com Let's consult!