Generally in our industry, you can see that many handboard models have completed the effect of oil injection, and injection can not only make the product beautiful, but also generally CNC processing handboard models, after injection treatment, can work with finished products.

　　手板模型需要磨在注射之前,磨削时考虑到光滑的手,明显的角,胶的痕迹显然不能暴露,颜色通常需要潘通色卡号码,通常在锅里说,这是普遍的在整个世界,这是一个规则的颜色。定性标准。一般来说，如果一个的手模厂需要有这样一个pant色卡控制表，以便客户有相关的注射需求，只需要提供相应的pun色卡号码。

　　The hand board model needs to be grinded before injection. When grinding, the smooth hand, obvious angle and glue trace cannot be exposed obviously. The color usually needs Pantone color card number. Generally speaking in the pot, this is a common color in the whole world, which is a regular color. Qualitative criteria. Generally speaking, if a professional hand mold factory needs to have such a pant color card control table, so that customers have related injection needs, only need to provide the corresponding pun color card number.

　　但是有些材料很难上色，比如POM(俗称钢材)、PP材料，它不能，染色后不太牢固，就会被磨掉。所以基本上西贡材料或PP材料是不上色的，通过CNC加工，只需要自然的颜色研磨。

　　But some materials are difficult to color, such as POM (commonly known as steel), PP material, it can't, after dyeing is not too solid, it will be worn off. So basically Saigon materials or PP materials are not colored. Through CNC processing, only natural color grinding is needed.

　　如果是做手板模型的外观，对产品外观的要求比较高，但是因为加工中使用的材料只有一种颜色。如果需要彩色效果，则需要使用后期注射来达到产品的质量。

　　If it is to make the appearance of the handboard model, the requirements for the product appearance are relatively high, but because the materials used in the processing only have one color. If color effects are required, late injection is required to achieve product quality.

　　本文由http://m.metferro.com发布

　　This article is published by http://m.metferro.com