Hand model processing is widely used in new product development. What are the main methods of surface treatment?

今天小編就來詳細介紹一下手板模型加工的表面處理方式。

Today Xiaobian will introduce the surface treatment method of handboard model processing in detail.

一：手工研磨拋光

1： Hand grinding and polishing

這種方法不需要特殊的設備，適應性比較強，主要取決于師傅的經驗技術水平。

This method does not need special equipment and has strong adaptability, which mainly depends on the experience and technical level of the master.

二：數字式手板拋光機

2： Digital hand polishing machine

這拋光工具采用數字化控制，數字式顯示和控制工藝參數，備有整套磨頭及磨料，半自動拋光，具有體積小、使用方便、質量穩定，重復性好的優點。

This polishing tool adopts digital control, digital display and control of process parameters, equipped with a complete set of grinding head and abrasive, semi-automatic polishing, with the advantages of small volume, convenient use, stable quality and good repeatability.
         

三：超聲波手板拋光機

3： Ultrasonic hand polishing machine

這種拋光工具采用高頻電火花脈沖電源與超聲波快速振動研磨的原理進行拋光。

This kind of polishing tool adopts the principle of high frequency electric spark pulse power supply and ultrasonic rapid vibration grinding to polish.

四：用高速銑削技術作為手板半精加工和精加工

4： Using high speed milling technology as semi finish machining and finish machining

采用高速銑削加工手板型面可比EDM加工節省25%～60%加工工時 ，高速銑削的型面表面處理質量好。

Compared with EDM, high-speed milling can save 25% ～ 60% of working time, and the surface treatment quality of high-speed milling is good.

以上簡單介紹了幾款表面處理的方法，感謝您的閱讀，希望以上內容對您有所幫助！

The above brief introduction of several surface treatment methods, thank you for reading, I hope the above content is helpful to you!