醫療器械外殼定制模具的注意事項您知道有哪些嗎？下面就讓小編來為您講解一番吧。

Do you know what are the precautions for the customized mold of medical device shell? Let me explain it for you.

醫療器械外殼的定制商選用厚片吸塑加工工藝提高了產品的性能。厚片吸塑是產品生產和生產加工的全過程，通過一系列的設計工藝流程在吸塑崗位包裝后，厚片吸塑有關的應用環節中要求開展比較請理性的實用效果，賦予產品比較美觀的外型性，所以在開展吸塑解決的時候要很留意。

The manufacturer of the medical device shell selects the thick sheet Blister processing technology to improve the product performance. Thick sheet Blister is the whole process of product production and processing. After packaging in the blister post through a series of design process, the application links related to thick sheet Blister require more rational practical effects and give the product more beautiful appearance. Therefore, attention should be paid to the solution of blister.

模具的溫度是否在標準范圍內，因為在料管的溫度無法在發展的情況下，模具溫度的設定雖然屬于加工工藝技術參數的范疇，也會表現出涂膠不均勻，留意吸塑包裝廠生產的高速沖床壓邊的解決方案，讓吸塑解決的產品一體化，留意刀片在整個切割過程中的應用，保證附近的平面度達到一個比較滿意的效果。

Whether the temperature of the mold is within the standard range, because under the condition that the temperature of the material pipe cannot be developed, the setting of the mold temperature, although it belongs to the scope of the technical parameters of the processing process, will also show uneven gluing. Pay attention to the solution of the high-speed punching machine produced by the blister packaging factory, integrate the products solved by blister, and pay attention to the application of the blade in the whole cutting process, Ensure that the flatness of the vicinity reaches a relatively satisfactory effect.

是否達到材料的枯燥乏味時間，造成模具部分區域出現氣線和縮印；醫療器械外殼生產商應留意吸塑產品的薄厚度，生產過程中溫度的變化、以及其發布后產品的薄厚度，并通過開展溫度的護理，發布后放置模具復合型部件的規定。

Whether the boring time of the material is reached, resulting in air lines and indentation in some areas of the mold; The manufacturer of medical device shell shall pay attention to the thin thickness of Blister products, the temperature changes during the production process, and the thin thickness of the products after release, and carry out temperature care, and place the mold composite parts after release.

在開展產品生產過程中留意產品的劃痕和掛線，稍大的產品規格與模具溫度有一點關聯，因為如果模具溫度不足，產品制冷不均勻，收攏不一樣，不僅危及產品規格，還會危及外觀。所以在開展實際操作過程中要特別留意，生產流水線上要留意包裝和冷沖壓，通過材料的薄厚度來調節溫度，防止這種情況下出現吊線的情況。

In the process of product production, pay attention to the scratches and hanging lines of the product. The slightly larger product specification is slightly related to the mold temperature, because if the mold temperature is insufficient, the cooling of the product is not uniform and the folding is not the same, which not only endangers the product specification, but also endangers the appearance. Therefore, special attention shall be paid to the packaging and cold stamping on the production line during the actual operation, and the temperature shall be adjusted by the thin thickness of the material to prevent the suspension of the wire in this case.

目前醫療器械外殼廠家的厚片吸塑可以替代傳統式的注塑模具加工，可以節省昂貴的注塑加工成本，提高制做產品的性能，同時可以替代傳統式的工藝制造，無需改變。更多相關內容就來我們網站http://m.metferro.com咨詢了解吧。

At present, the thick sheet Blister of the medical device shell manufacturer can replace the traditional injection mold processing, save the expensive injection molding cost, improve the performance of the manufactured products, and replace the traditional process manufacturing without change. For more information, please visit our website http://m.metferro.com Consult and understand.