常见问题
产品
联系嘉瑞杰
山东嘉瑞杰机械科技有限公司
联系人：王经理
电话：0531-88670722
手机 : 15866677695
地址：济南市天桥区梓东大道鑫茂科技城143号楼102室
3d打印手板模型如何进行修补处理？
来源：http://m.metferro.com作者：山东嘉瑞杰机械科技有限公司发布时间：2020-01-19
大家好，我是小编。3 d打印hand-board模型功能验证的用户或设计验证总是满足哈希,很难避免不小心刮他的作品,同时,在运输的过程中,也难免会散列,不小心烂,失去了打印,不愿意放弃,这就是3 d打印hand-board模型修复。下面是一个实用的介绍。
Hello, I'm Xiaobian. The user or design verification of 3D print hand board model function verification always satisfies the hash, so it's hard to avoid scraping his works carelessly. At the same time, in the process of transportation, it's hard to avoid hashing, carelessly rotting, losing printing and unwilling to give up. This is 3D print hand board model repair. Here is a practical introduction.
1. 用502胶水粘接。(502胶水不宜过量，会影响粘合效果，注意使用502胶水)除502胶水外，还介绍了几种其他不同种类的胶水可以使用。
1. Use 502 glue for bonding. (502 glue should not be excessive, which will affect the bonding effect. Pay attention to the safe use of 502 glue). In addition to 502 glue, several other different kinds of glue can be used.
2. 粘贴后仍然会有一些小的间隙
2. There will still be some small gaps after pasting
3.还有一些缺失的部分，是缺口。
3. There are still some missing parts, which are gaps.
4. 先打磨缝隙，试着处理痕迹。
4. First polish the gap and try to deal with the traces.
5. 使用3d打印笔，使用ABS 3d打印材料进行修复(ABS比PLA打磨的更好)，其他材料可以进行修复。
5. Use 3D printing pen, use ABS 3D printing material for repair (ABS is better than PLA grinding), and other materials can be repaired.
6. 使用3D打印笔来填补空白。这是PLA 3D打印材料。其他材料，如SLA光敏树脂，不能使用3D打印笔。
6. Use a 3D pen to fill in the blanks. This is PLA 3D printing material. Other materials, such as SLA photosensitive resin, cannot use 3D printing pen.
7. 波兰。砂纸可用来抛光。砂纸厚度可根据模型的具体要求进行选择。
7. Poland. Sandpaper can be used for polishing. The thickness of sandpaper can be selected according to the specific requirements of the model.
重复3次，以填补和抛光的差距和差距，以确保顺利连接的差距和表面
Repeat 3 times to fill and polish gaps and gaps to ensure smooth connection of gaps and surfaces
8 .修的差不多，因为这是测试用的，所以随机修，修的效果一般，比较仔细可以修的痕迹不大。
8. It's almost repaired, because it's for testing, so the effect of random repair is general, and the trace that can be repaired carefully is not big.
9. 经过以上步骤，3D打印的手板模型的修复工作就完成了，其实并不难，用更多的人手就可以很好的修复。
9. After the above steps, the repair of 3D printed handboard model is completed. In fact, it is not difficult. It can be well repaired with more hands.
上一篇：做手板模型的时候为什么要喷油呢？
下一篇：快速成型材料选择的重要性！
相关资讯
手板制作加工时注意事项
2024-04-11手板加工如何服务好客户?
2024-04-09手板加工的过程及方式
2024-04-06快速成型的基本原理构成有哪些？
2024-02-27工业产品设计中常见手板件的制作方式
2024-02-23ABS手板模型的优势有哪些？
2024-02-21铝合金手板模型制作手法与维护
2024-02-10铝合金手板模型的氧化工艺介绍
2024-02-10汽车手板模型制作的低压灌注工艺
2024-02-06手把手教你怎么选机箱机柜定制工厂
2024-01-27
